| Quantity: | |
|---|---|
| PDF Export | |
Product advantages
Continuous low pulsation conveying, unaffected by pressure and viscosity fluctuations.
Widely applicable, it can transport flowing or even non flowing materials.
The medium will not be stirred, squeezed or sheared during the pumping process.
High efficiency, the conveying volume is proportional to the rotational speed, and the conveying volume can be adjusted by frequency conversion.
Most liquids can be pumped with small agitation and pulsation.
Easy to maintain and repair, with high-pressure conveying capacity.
Selection scope
Petroleum industry: heavy oil transportation, mixed oil and gas transportation, oil-water separation, and waste oil recovery systems.
Chemical and pharmaceutical industries: various pastes, emulsions, suspensions, etc.
Environmental engineering: various sewage transportation, dewatering sludge transportation, metering and dosing of flocculants and their chemical agents, etc.
Mineral engineering: production equipment for titanium dioxide, kaolin, calcium carbonate, etc.
Food industry: dairy products, fruit juice, puree, vegetable sauce, beer, etc.
Paper industry: raw material equipment, pulping, and wastewater treatment.
Performance Parameter
Performance parameters at fixed speed
Model | Flow (m³/h) | Pressure (Mpa) | Max allowed revolutions (r/min) | Motor Power (kW) | Required NPSH (m) | Inlet flange diameter (mm) | Outlet flange diameter (mm) | Allow particle diameter (mm) | Allow fiber length (mm) |
G20-1 | 0.8 | 0.6 | 960 | 0.75 | 4 | 25 | 25 | 1.5 | 25 |
G20-2 | 1.2 | 1.5 | |||||||
G25-1 | 2 | 0.6 | 960 | 1.5 | 32 | 25 | 2 | 30 | |
G25-2 | 1.2 | 2.2 | |||||||
G30-1 | 5 | 0.6 | 960 | 2.2 | 50 | 40 | 2.5 | 35 | |
G30-2 | 1.2 | 3 | |||||||
G35-1 | 8 | 0.6 | 960 | 3 | 65 | 50 | 3 | 40 | |
G35-2 | 1.2 | 4 | |||||||
G40-1 | 12 | 0.6 | 960 | 4 | 80 | 65 | 3.8 | 45 | |
G40-2 | 1.2 | 5.5 | |||||||
G50-1 | 20 | 0.6 | 960 | 5.5 | 4.5 | 100 | 80 | 5 | 50 |
G50-2 | 1.2 | 7.5 | |||||||
G60-1 | 30 | 0.6 | 960 | 11 | 5 | 125 | 100 | 6 | 60 |
G60-2 | 1.2 | 15 | |||||||
G70-1 | 45 | 0.6 | 720 | 11 | 150 | 125 | 8 | 70 | |
G70-2 | 1.2 | 15 | |||||||
G85-1 | 60 | 0.6 | 720 | 15 | 150 | 150 | 10 | 80 | |
G85-2 | 1.2 | 450 | 22 | ||||||
G105-1 | 80 | 0.6 | 400 | 22 | 200 | 200 | 15 | 110 | |
G105-2 | 1.2 | 350 | 30 | ||||||
G135-1 | 120 | 0.6 | 350 | 37 | 250 | 250 | 20 | 150 | |
G135-2 | 1.2 | 280 |
Product advantages
Continuous low pulsation conveying, unaffected by pressure and viscosity fluctuations.
Widely applicable, it can transport flowing or even non flowing materials.
The medium will not be stirred, squeezed or sheared during the pumping process.
High efficiency, the conveying volume is proportional to the rotational speed, and the conveying volume can be adjusted by frequency conversion.
Most liquids can be pumped with small agitation and pulsation.
Easy to maintain and repair, with high-pressure conveying capacity.
Selection scope
Petroleum industry: heavy oil transportation, mixed oil and gas transportation, oil-water separation, and waste oil recovery systems.
Chemical and pharmaceutical industries: various pastes, emulsions, suspensions, etc.
Environmental engineering: various sewage transportation, dewatering sludge transportation, metering and dosing of flocculants and their chemical agents, etc.
Mineral engineering: production equipment for titanium dioxide, kaolin, calcium carbonate, etc.
Food industry: dairy products, fruit juice, puree, vegetable sauce, beer, etc.
Paper industry: raw material equipment, pulping, and wastewater treatment.
Performance Parameter
Performance parameters at fixed speed
Model | Flow (m³/h) | Pressure (Mpa) | Max allowed revolutions (r/min) | Motor Power (kW) | Required NPSH (m) | Inlet flange diameter (mm) | Outlet flange diameter (mm) | Allow particle diameter (mm) | Allow fiber length (mm) |
G20-1 | 0.8 | 0.6 | 960 | 0.75 | 4 | 25 | 25 | 1.5 | 25 |
G20-2 | 1.2 | 1.5 | |||||||
G25-1 | 2 | 0.6 | 960 | 1.5 | 32 | 25 | 2 | 30 | |
G25-2 | 1.2 | 2.2 | |||||||
G30-1 | 5 | 0.6 | 960 | 2.2 | 50 | 40 | 2.5 | 35 | |
G30-2 | 1.2 | 3 | |||||||
G35-1 | 8 | 0.6 | 960 | 3 | 65 | 50 | 3 | 40 | |
G35-2 | 1.2 | 4 | |||||||
G40-1 | 12 | 0.6 | 960 | 4 | 80 | 65 | 3.8 | 45 | |
G40-2 | 1.2 | 5.5 | |||||||
G50-1 | 20 | 0.6 | 960 | 5.5 | 4.5 | 100 | 80 | 5 | 50 |
G50-2 | 1.2 | 7.5 | |||||||
G60-1 | 30 | 0.6 | 960 | 11 | 5 | 125 | 100 | 6 | 60 |
G60-2 | 1.2 | 15 | |||||||
G70-1 | 45 | 0.6 | 720 | 11 | 150 | 125 | 8 | 70 | |
G70-2 | 1.2 | 15 | |||||||
G85-1 | 60 | 0.6 | 720 | 15 | 150 | 150 | 10 | 80 | |
G85-2 | 1.2 | 450 | 22 | ||||||
G105-1 | 80 | 0.6 | 400 | 22 | 200 | 200 | 15 | 110 | |
G105-2 | 1.2 | 350 | 30 | ||||||
G135-1 | 120 | 0.6 | 350 | 37 | 250 | 250 | 20 | 150 | |
G135-2 | 1.2 | 280 |