| Quantity: | |
|---|---|
| PDF Export | |
KCB gear oil pump is mainly used to transport lubricating oil in the lubrication system of various mechanical equipment, and can transport non-lubricating oil, beverages, and low-corrosive liquids. It is suitable for transporting lubricating oil that does not contain solid particles and fibers, is non-corrosive, the temperature is not higher than 80°C, and the viscosity is 5×10-6~1.5×10-3m2/s (5-1500cSt) or lubricating oil with similar properties. other liquids. KCB gear oil pump mainly consists of gear, shaft, pump body, safety valve and shaft end seal. Equipped with copper gears, it can transport low flash point liquids, such as gasoline, benzene, etc.
Product Parameters
Flow | 1.1~576 m³/h |
Speed | 800~1400 r/min |
EFF | 45~60 % |
Pressure | 0.6~1.45 Mpa |
NPSHr | 5~8 m |
Power | 1.5~250 KW |
Scope of Application:
• Can be used as transmission and booster pump in oil delivery system;
• It can be used as a fuel pump for delivery, pressurization and injection in the fuel system;
• Can be used as a hydraulic pump to provide hydraulic power in hydraulic transmission systems;
• Can be used as lubricating oil pump in all industrial fields
Product Features:
• No wear on the tooth surface, smooth operation, no trapped liquid, low noise, long life and high efficiency.
• This pump breaks away from the constraints of traditional design and takes gear pumps into a new field in design, production and use.
• The pump is equipped with a safety valve as overload protection. The full return pressure of the safety valve is 1.5 times the rated discharge pressure of the pump. It can also be adjusted according to actual needs within the allowable discharge pressure range.
gear oil pump mainly consists of gear, shaft, pump body, safety valve and shaft end seal. The gears have been heat-treated to have higher hardness and strength, and are installed together with the shaft in a replaceable sleeve to run. Lubrication of all parts in the pump is automatically achieved by using the output medium when the pump is working.
There are well-designed oil drain and oil return grooves in the pump. The gears bear less torque during operation, so the bearing load is small, the wear is small, and the pump efficiency is high.
The pump is equipped with a safety valve as overload protection. The full return pressure of the safety valve is 1.5 times the rated discharge pressure of the pump. It can also be adjusted according to actual needs within the allowable discharge pressure range. However, please note that this safety valve cannot be used as a pressure reducing valve for a long time and can be installed separately on the pipeline if necessary.
When viewed from the extended end of the main shaft towards the pump, it rotates clockwise.
Performance Parameters
Type | Aperture mm | Flow L/min | pressure Mpa | Self priming heig htm | EFF (%) | Equipped with three-phase asynchronous motor | ||
Power KW | Speed r/min | Type | ||||||
KCB18.3 | Φ18 | 18.3 | 1.45 | 5 | 44 | 1.5 | 1420 | Y90L-4 |
KCB33.3 | Φ18 | 33.3 | 1.45 | 5 | 44 | 2.2 | 1420 | Y100L1-4 |
KCB55 | Φ25 | 55 | 0.33 | 7 | 39 | 1.5 | 1420 | Y90L-4 |
KCB83.3 | Φ40 | 83.3 | 0.33 | 7 | 40 | 2.2 | 1420 | Y100L1-4 |
KCB200 | Φ50 | 200 | 0.33 | 5 | 41 | 4 | 1440 | Y112M-4 |
KCB300 | Φ80 | 300 | 0.36 | 4.5 | 42 | 5.5 | 960 | Y132M2-6 |
KCB483.3 | Φ80 | 483.3 | 0.36 | 5 | 43 | 11 | 1440 | Y160M-4 |
KCB633 | Φ100 | 633 | 0.28 | 6 | 43 | 11 | 970 | Y100L-6 |
KCB960 | Φ100 | 960 | 0.28 | 6.5 | 43 | 18.5 | 1470 | Y180M-4 |
Product Photograph
KCB gear oil pump is mainly used to transport lubricating oil in the lubrication system of various mechanical equipment, and can transport non-lubricating oil, beverages, and low-corrosive liquids. It is suitable for transporting lubricating oil that does not contain solid particles and fibers, is non-corrosive, the temperature is not higher than 80°C, and the viscosity is 5×10-6~1.5×10-3m2/s (5-1500cSt) or lubricating oil with similar properties. other liquids. KCB gear oil pump mainly consists of gear, shaft, pump body, safety valve and shaft end seal. Equipped with copper gears, it can transport low flash point liquids, such as gasoline, benzene, etc.
Product Parameters
Flow | 1.1~576 m³/h |
Speed | 800~1400 r/min |
EFF | 45~60 % |
Pressure | 0.6~1.45 Mpa |
NPSHr | 5~8 m |
Power | 1.5~250 KW |
Scope of Application:
• Can be used as transmission and booster pump in oil delivery system;
• It can be used as a fuel pump for delivery, pressurization and injection in the fuel system;
• Can be used as a hydraulic pump to provide hydraulic power in hydraulic transmission systems;
• Can be used as lubricating oil pump in all industrial fields
Product Features:
• No wear on the tooth surface, smooth operation, no trapped liquid, low noise, long life and high efficiency.
• This pump breaks away from the constraints of traditional design and takes gear pumps into a new field in design, production and use.
• The pump is equipped with a safety valve as overload protection. The full return pressure of the safety valve is 1.5 times the rated discharge pressure of the pump. It can also be adjusted according to actual needs within the allowable discharge pressure range.
gear oil pump mainly consists of gear, shaft, pump body, safety valve and shaft end seal. The gears have been heat-treated to have higher hardness and strength, and are installed together with the shaft in a replaceable sleeve to run. Lubrication of all parts in the pump is automatically achieved by using the output medium when the pump is working.
There are well-designed oil drain and oil return grooves in the pump. The gears bear less torque during operation, so the bearing load is small, the wear is small, and the pump efficiency is high.
The pump is equipped with a safety valve as overload protection. The full return pressure of the safety valve is 1.5 times the rated discharge pressure of the pump. It can also be adjusted according to actual needs within the allowable discharge pressure range. However, please note that this safety valve cannot be used as a pressure reducing valve for a long time and can be installed separately on the pipeline if necessary.
When viewed from the extended end of the main shaft towards the pump, it rotates clockwise.
Performance Parameters
Type | Aperture mm | Flow L/min | pressure Mpa | Self priming heig htm | EFF (%) | Equipped with three-phase asynchronous motor | ||
Power KW | Speed r/min | Type | ||||||
KCB18.3 | Φ18 | 18.3 | 1.45 | 5 | 44 | 1.5 | 1420 | Y90L-4 |
KCB33.3 | Φ18 | 33.3 | 1.45 | 5 | 44 | 2.2 | 1420 | Y100L1-4 |
KCB55 | Φ25 | 55 | 0.33 | 7 | 39 | 1.5 | 1420 | Y90L-4 |
KCB83.3 | Φ40 | 83.3 | 0.33 | 7 | 40 | 2.2 | 1420 | Y100L1-4 |
KCB200 | Φ50 | 200 | 0.33 | 5 | 41 | 4 | 1440 | Y112M-4 |
KCB300 | Φ80 | 300 | 0.36 | 4.5 | 42 | 5.5 | 960 | Y132M2-6 |
KCB483.3 | Φ80 | 483.3 | 0.36 | 5 | 43 | 11 | 1440 | Y160M-4 |
KCB633 | Φ100 | 633 | 0.28 | 6 | 43 | 11 | 970 | Y100L-6 |
KCB960 | Φ100 | 960 | 0.28 | 6.5 | 43 | 18.5 | 1470 | Y180M-4 |
Product Photograph