QSP Type Outdoor Fountain Submersible Pump

The QSP fountain submersible pump is mainly used in large square fountains, park fountains, waterfalls, villa fountains, aquaculture and other places. Widely used in urban community fountains, garden fountains, farmland drainage and irrigation, sprinkler irrigation; Industrial and civil water supply and drainage systems, water diversion in hilly and mountainous areas, and drainage in low-lying areas.

QSP fountain submersible pump product features:

1. Use cast iron or stainless steel materials to improve the corrosion resistance and wear resistance of the pump

2. The impeller is made of special materials to prevent it from loosening during rotation

3. It has leakage protection measures and adopts a constant potential grounding device to further improve the protection performance of the fountain pump

On the basis of the original ordinary pump, according to the requirements of the fountain pump special pump, after multiple tests and continuous development in technology, the motor and cable parts of the raw materials are continuously improved, making the fountain pump can be started frequently and fully suitable for the use of music fountain pumps.

5. The pump adopts a stainless steel filter screen cover, which can effectively block large particles from entering the pump chamber

6. The QSP type Shouquan dedicated submersible pump has an automatic water injection function, and the motor is self circulating water filling cooling, which will not cause pollution to the water source.

Service conditions of QSP type fountain submersible pump

1. The fountain submersible pump should be fully immersed in water for operation, with a diving depth of not less than 0.5 meters and not more than 5 meters.

2. The ambient water temperature should not exceed 40 ℃.

3. The working medium is non corrosive clean water, with a sand content of no more than 0.1% and a pH value of 6.5-8.5.

4. The power supply should be three-phase 50 Hz, with a rated voltage of 380 volts, and its supply voltage must be ensured to be within the range of 342-420 volts.

5. The QSP type fountain submersible pump should be used within the applicable range near the rated head.

6. The fountain pump should be equipped with corresponding starting protectors and reliably grounded.

Product Selection Table