Shanghai JUSH Pump Manufacturing Co., Ltd. is a China-based split case pump manufacturer and supplier. Our factory is located in Songjiang District, Shanghai. We focus on flow control equipment and offer a wide pump range, including centrifugal pumps, circulating pumps, chemical pumps, fire pumps, slurry pumps, magnetic pumps, metering pumps, submersible pumps, and other industrial pump series.
Split case centrifugal pumps are commonly selected for high-volume water transfer, municipal engineering, industrial circulation, HVAC systems, power plant auxiliary systems, and process water applications. For buyers seeking stable flow control equipment, flexible configuration, and competitive manufacturing support from China, JUSH provides project-oriented communication from inquiry through supply and after-sales support.
Send us your flow rate, head, medium, temperature, voltage, frequency, and installation conditions. Our team can help prepare model selection, technical specifications, or a split case pump quotation.
Double suction split case pumps are widely used in large-flow systems where stable operation and hydraulic balance are important. In this design, liquid enters the impeller from both sides. This helps support smooth centrifugal pump performance in municipal water supply, industrial cooling water, commercial circulation, and large pipeline transfer systems.
A horizontal split case pump typically uses a casing divided along the shaft centerline. This structure can make inspection and maintenance more convenient than some fully enclosed casing designs. Service teams can access key internal components after removing the upper casing section, depending on the installation and pump configuration.
| Design Feature | Buyer Value | Typical Relevance |
|---|---|---|
| Double suction impeller arrangement | Supports stable high-flow operation and balanced hydraulic performance | Municipal water transfer, plant circulation, large pumping stations |
| Horizontal split casing | Allows easier casing inspection and access to internal components during maintenance | Systems where maintenance planning and service access are important |
| Centrifugal pump principle | Suitable for continuous liquid transfer where flow and head must be matched accurately | Water supply, cooling water, process water, HVAC circulation |
| Project-based configuration | Helps match pump materials, sealing, motor, and connection requirements to the duty | Industrial, municipal, chemical, power, and metallurgy projects |
The horizontal split case pump structure is valued by engineers because it supports practical access to the casing, impeller, shaft area, and related wear components. For large pipeline systems, this can help simplify maintenance planning. Pump room layout, coupling arrangement, and piping design should be considered during selection.
When replacing an existing centrifugal water pump, the horizontal layout should match the current baseplate, suction and discharge piping, motor position, and service space. JUSH can review project information to help buyers decide whether this configuration suits the installation.
Stable centrifugal pump performance depends on correct hydraulic selection, suitable materials, and proper system matching. A double suction split case pump can be a strong choice for continuous-duty water supply, cooling water circulation, and industrial transfer systems.
For municipal facilities, commercial buildings, industrial plants, and power-related systems, pump selection should be based on real operating data. This approach helps avoid underperformance, unnecessary energy use, and unsuitable operating conditions.
JUSH split case centrifugal pumps are supported by our experience in pump manufacturing, R&D, sales, customization, and international trade. For procurement teams and engineering contractors, this integrated capability helps reduce communication gaps between product selection, manufacturing coordination, and after-sales support.
As a pump manufacturer with 15 years of manufacturing experience, JUSH serves multiple industries. These include municipal engineering, mining, petroleum, chemical, biopharmaceutical, power plants, and metallurgy. We position our pump products as quality-oriented and competitively priced, with flexible customization on featured products.
Integrated R&D, production, and sales support for project communication.
Wide pump product series and specifications for different industrial requirements.
Flexible configuration support for material, sealing, motor, and installation needs where applicable.
Independent import and export rights for international purchasing and project supply.
Reliable after-sales support promoted as part of JUSH supplier service.
JUSH combines pump development, production, and sales in one enterprise. This is useful when buyers need technical discussion before placing an order. Instead of treating pump selection as a simple catalog choice, we communicate around operating conditions, application environment, and project constraints.
This integrated support is valuable for EPC contractors, distributors, plant owners, and procurement teams. It helps them confirm models, discuss configurations, and align quotations before final purchasing decisions.
A custom split case pump may be required when the liquid medium, installation layout, sealing requirements, motor matching, or connection arrangement differs from a standard project. JUSH supports flexible customization on featured products and can discuss configuration recommendations based on your process and site information.
For accurate pump selection, please provide flow rate, total head, medium type, temperature, pressure condition, voltage and frequency, suction and discharge requirements, and installation environment. More complete operating data helps our team make more practical recommendations.
JUSH has independent import and export rights and serves customers across the Middle East, Southeast Asia, Europe, and the United States. This makes us a practical split case pump supplier for overseas distributors, industrial buyers, water project contractors, and engineering companies.
With manufacturing based in Shanghai, JUSH supports international pump sourcing while maintaining direct communication between buyer and manufacturer.
Split case pumps are suitable for systems that require large-volume liquid transfer, stable pressure delivery, and reliable operation. They are often considered for municipal water supply, pipeline boosting, HVAC circulation, industrial cooling, power plants, oil and gas, chemical processing, metallurgy, and mining-related applications.
The correct application depends on the medium, flow, head, material compatibility, site conditions, and operating duty. JUSH can help evaluate whether a split case centrifugal pump, another centrifugal pump type, or a specialized pump series better suits your project.
| Application Area | Typical Use | Selection Notes |
|---|---|---|
| Municipal water supply | Water plants, distribution systems, transfer pumping, pipeline boosting | Confirm flow range, head, inlet pressure, and continuous operation requirements |
| HVAC and commercial circulation | Chilled water, cooling water, building circulation loops | Check installation space, motor matching, noise expectations, and maintenance access |
| Industrial circulation | Cooling water, process water, plant utility systems | Review duty cycle, temperature, medium cleanliness, and system pressure |
| Power plants and metallurgy | Auxiliary water systems, cooling circuits, transfer service | Focus on reliability, correct materials, and operating continuity |
| Oil, gas, and chemical projects | Process support, transfer duties, utility water applications | Confirm liquid properties, corrosion risk, sealing needs, and safety requirements |
| Mining and heavy industry | Water transfer, industrial site circulation, utility pumping | Consider medium condition, particles, operating environment, and service access |
In municipal engineering, split case pumps are commonly used for water plants, large-scale water transfer, pipeline boosting, and water distribution systems. These projects usually require stable operation, dependable flow delivery, and suitable matching with existing piping and control systems.
When selecting a water supply pump, engineers should confirm the demand curve, inlet conditions, discharge pressure requirements, and operating schedule. JUSH can review these details and recommend a suitable configuration.
For HVAC and industrial circulation systems, split case centrifugal pumps can support chilled water, cooling water, and circulation loops. Typical applications include commercial buildings, factories, and process plants. Stable circulation is important for heat exchange efficiency, equipment protection, and continuous facility operation.
Buyers should consider flow and head, as well as equipment room layout, coupling access, motor selection, and maintenance space. Proper installation planning helps the pump operate more reliably in long-term service.
Demanding industrial environments require careful pump selection because medium, temperature, pressure, and corrosion conditions can vary significantly. In power plants, metallurgy, oil and gas, and chemical industry projects, material selection and sealing configuration are especially important.
JUSH supplies industrial pump products for multiple sectors and can discuss application-specific requirements. If the medium is not clean water, please provide detailed liquid properties so our team can review the configuration properly.
Selecting a split case centrifugal pump requires more than identifying a general pump type. Engineers and procurement teams should confirm hydraulic requirements, medium characteristics, material needs, installation space, motor requirements, and operating duty before finalizing the model.
Accurate selection helps improve system compatibility and reduces sourcing risk. The following table can be used as a practical checklist when preparing an inquiry for JUSH.
| Selection Factor | Information to Confirm | Why It Matters |
|---|---|---|
| Flow rate | Required capacity under normal, minimum, and maximum conditions | Ensures the pump can meet system demand without unsuitable operation |
| Total head | Static head, friction loss, discharge pressure, and suction conditions | Determines pump sizing and performance curve matching |
| Medium | Clean water, process water, chemical liquid, temperature, viscosity, solids, corrosiveness | Impacts casing, impeller, shaft, and seal material selection |
| Operating duty | Continuous or intermittent operation, daily operating hours, standby requirements | Helps match reliability expectations and configuration needs |
| Installation layout | Baseplate, pump room space, inlet and outlet direction, existing piping | Improves site compatibility and maintenance accessibility |
| Motor and power supply | Voltage, frequency, motor power expectation, control requirements | Supports correct motor matching and electrical compatibility |
Flow rate and head are the foundation of split case pump selection. Buyers should provide required flow, total head, suction pressure or suction lift, discharge pressure, operating hours, and duty type.
If the system has variable demand, standby pumps, or parallel operation, please include this in the inquiry. These details help JUSH recommend a pump that fits the real operating profile, not only a single estimated point.
Clean water, process water, chemical liquids, and industrial fluids may require different casing, impeller, shaft, and sealing materials. Temperature, corrosion risk, particle content, and liquid compatibility should be discussed before confirming the pump configuration.
For chemical or process applications, JUSH may recommend reviewing whether a specialized chemical pump is more suitable. The final choice depends on the medium and operating conditions.
Installation details affect pump performance and maintenance convenience. Buyers should check baseplate arrangement, motor position, coupling access, inlet and outlet orientation, pipeline stress, and service space around the pump.
If the pump is for replacement, drawings, photos, existing nameplate information, and piping dimensions can speed up the recommendation process. This is especially useful when the new pump must fit an established pump room layout.
JUSH supports project-based pump selection and customization for municipal and industrial applications. For split case pump projects, we can discuss specification matching, configuration recommendations, and after-sales communication based on your operating requirements.
This support is useful for distributors, EPC contractors, plant owners, and procurement teams. It helps buyers work with a pump supplier that can coordinate technical details, production, and export supply. Complete operating data at the inquiry stage supports more accurate recommendations and clearer quotation information.
To help JUSH review your project efficiently, please prepare the key pump selection information before inquiry. A complete parameter list can reduce back-and-forth communication and help our technical team identify suitable configurations faster.
Liquid type and liquid properties.
Required flow rate and total head.
Liquid temperature and pressure conditions.
Voltage, frequency, and motor requirements.
Installation environment and available pump room space.
Suction and discharge pipe arrangement.
Continuous, intermittent, standby, or emergency operation requirements.
Industry application, such as municipal water, HVAC, chemical, power plant, metallurgy, oil and gas, or mining.
JUSH promotes reliable after-sales support on featured products and has independent import and export rights. For overseas buyers, this can support export communication, order coordination, documentation discussion, and long-term supplier cooperation.
International customers across the Middle East, Southeast Asia, Europe, and the United States work with JUSH for pump supply across multiple industrial sectors. Our broad product range also allows buyers to discuss related pump needs when a project requires multiple pump types.
Shanghai JUSH Pump Manufacturing Co., Ltd. brings together pump manufacturing, R&D, sales, and international trade capability in one enterprise. The company has 15 years of manufacturing experience and a factory in Songjiang District, Shanghai. JUSH also established an independent R&D brand in 2008 and started a new pump control production line in 2023.
JUSH supplies a wide range of pump product series and specifications for municipal engineering, oil and gas, chemical industry, power, metallurgy, mining, biopharmaceutical, and other industrial sectors. For buyers comparing split case centrifugal pump suppliers, we offer quality-oriented manufacturing, competitive pricing, flexible customization, and practical after-sales communication.
Professional pump manufacturer focused on flow control.
Integrated R&D, production, sales, and import/export rights.
Factory located in Shanghai, China.
International market experience across multiple regions.
Broad product coverage for industrial and municipal pump projects.
Customization support for project-specific pump requirements.
If you need a quote for municipal water supply, HVAC circulation, industrial cooling, power plant service, chemical processing, oil and gas, metallurgy, or mining applications, contact Shanghai JUSH Pump. As a split case centrifugal pump manufacturer, we can review your operating parameters and recommend a suitable configuration for your project.
For faster quotation, please send your required flow rate, total head, medium, temperature, voltage, frequency, installation layout, and application details. The JUSH team can support model selection, custom pump configuration discussion, and export supply communication for domestic and overseas projects.
Request a Split Case Pump Quote Send Pump Parameters Contact JUSH Technical Team
It is commonly used for high-flow water transfer, municipal water supply, HVAC circulation, industrial cooling water, power plants, and process water systems. Our team can review your duty conditions to confirm whether it fits your application.
A double suction split case pump is a common design where liquid enters the impeller from both sides. This arrangement helps support stable high-flow operation in large pumping systems.
You should confirm flow rate, head, liquid type, temperature, installation layout, motor requirements, and operating duty. JUSH can recommend a suitable configuration based on these parameters.
Yes. We offer flexible pump configuration support based on project requirements. This may include material selection, sealing options, motor matching, and application-specific recommendations.
Yes. Shanghai JUSH Pump has independent import and export rights. We serve customers in international markets including the Middle East, Southeast Asia, Europe, and the United States.
